Clearwater, FL
4.9/5 from 25,000+ Homeowners
Safe, modern wiring for Clearwater homes, to protect your family and property.
Homes over 50 years old likely have outdated wiring inadequate for modern electrical demands and safety standards. If you’re living in an older Clearwater residence, your home may have cloth-insulated wiring, ungrounded circuits, or aluminum wiring that cannot safely support today’s electronics.
These wiring types are fire hazards and fail to meet current codes, so professional replacement is essential for safety and insurability.
Scorch marks, burning odors, or sparking outlets indicate dangerous wiring failures that require immediate attention from trusted professionals.
Constant breaker trips, blown fuses, or flickering lights signal wiring unable to handle your home’s electrical load, and an upgrade is needed for safety.
If you’re in an older Clearwater home, especially near the coast, you may have wiring that wasn’t designed for modern electrical needs. Aluminum wiring, knob-and-tube systems, ungrounded circuits, and deteriorating insulation pose serious fire risks and salt air and high humidity can accelerate corrosion and damage connections faster than in inland areas.
Mister Sparky’s licensed electricians specialize in rewiring older homes using modern materials and techniques that minimize wall damage while ensuring safety and compliance. Our rewiring services provide reliable electrical systems that protect your family, support today’s electronics, and comply with Florida building codes. When you reach out to us, you’ll never need to spend time urgently searching for house rewiring near me. We’ll handle any wiring issues your home has promptly, so you can feel safe and secure.
Complete home rewiring replaces every circuit from the panel to each outlet, switch, and fixture, so you can feel confident in a comprehensive approach that ensures consistent safety all throughout your home. Our dedicated electricians carefully plan wire routes, fish new cables through walls and attics to minimize damage, install grounded outlets, and upgrade all circuits to current code, and our room-by-room work means you’ll have power in unaffected areas whenever possible. If you’re in a coastal Clearwater home, you can also benefit from marine-grade connections and humidity protection.
Whole-house rewiring usually takes 3 to 7 days depending on the size of your home, but when it’s done you’ll have decades of safe, reliable electrical service. By choosing us at Mister Sparky for whole house rewiring in Clearwater, Florida, you can expect all circuits to be replaced panel-to-device, grounded three-wire systems, modern code-compliant materials, and GFCI/AFCI protection where required.
Homes built between 1965 and 1973 often contain aluminum wiring, which expands and contracts with temperature. That can loosen its connections and create a serious fire hazard. Aluminum also oxidizes, increasing resistance and heat at connection points. We’ll remove your home’s aluminum circuits and replace them with copper wiring, using approved connectors for any temporary aluminum sections.
Knob-and-tube wiring, common in Clearwater homes built before 1950, lacks grounding, uses deteriorating cloth insulation, and can’t safely handle modern electrical loads. You can rely on our team to remove all knob-and-tube circuits, install modern cable or conduit systems, ensure proper grounding, and bring your home up to current Florida electrical code.
Not every home requires full rewiring. Sometimes only specific circuits or rooms need attention, such as high-demand circuits for kitchens, laundry rooms, or additions. Our electricians assess which circuits in your home pose risks, replace or update them, and ensure seamless integration with your existing wiring.
If you’re not completely satisfied with our work, we’ll make it right or refund your money.
Whole house rewiring typically costs $8,000 to $15,000 depending on size and complexity. Partial rewiring costs $1,500 to $4,000.
Complete rewiring takes 3 to 7 days. Partial rewiring completes in 1 to 3 days, and we always work efficiently to minimize disruption.
Yes, though it may be inconvenient. We maintain power to some areas while working on others.
Some access holes are necessary, but we’ll minimize damage and patch your walls for painting afterward.
Yes, all rewiring requires electrical permits and inspection. We’ll handle all the permitting to ensure code compliance.
Aluminum wiring is marked “AL” or “ALUMINUM” on the cable sheathing. Homes built between 1965 and 1973 likely contain aluminum wiring.
Yes! Safe, modern wiring is essential for home sales and insurance, and updated systems often return 100%+ of your investment.
We can help you protect your family and enjoy a more modern electrical system in your home. Get in touch with us today at Mister Sparky by calling (727) 371-4962 today or reaching out to us online for a free evaluation and quote!
Expert installation of new wiring throughout your home using high-quality materials and industry-best practices.
How can we help you?
Mister Sparky
12345 Starkey Rd., Ste. B,
Largo, FL 33773
Monday: 24 Hours
Tuesday: 24 Hours
Wednesday: 24 Hours
Thursday: 24 Hours
Friday: 24 Hours
Saturday: 24 Hours
Sunday: 24 Hours
Connect with Us